| ATP-STL-010 |
|
(SS) Stainless Steel 45 Degree Elbow - 2.00" OD |
| ATP-STL-011 |
|
(SS) Stainless Steel 45 Degree Elbow - 2.25" OD |
| ATP-STL-012 |
|
(SS) Stainless Steel 45 Degree Elbow - 2.50" OD |
| ATP-STL-013 |
|
(SS) Stainless Steel 45 Degree Elbow - 2.75" OD |
| ATP-STL-014 |
|
(SS) Stainless Steel 45 Degree Elbow - 3.00" OD |
| ATP-STL-037 |
|
(SS) Stainless Steel 45 Degree Elbow - 3.5" Diameter (OD) |
| ATP-STL-015 |
|
(SS) Stainless Steel 45 Degree Elbow - 4.00" OD |
| ATP-STL-016 |
|
(SS) Stainless Steel 90 Degree Elbow - 2.00" OD |
| ATP-STL-017 |
|
(SS) Stainless Steel 90 Degree Elbow - 2.25" OD |
| ATP-STL-018 |
|
(SS) Stainless Steel 90 Degree Elbow - 2.50" OD |
| ATP-STL-019 |
|
(SS) Stainless Steel 90 Degree Elbow - 2.75" OD |
| ATP-STL-020 |
|
(SS) Stainless Steel 90 Degree Elbow - 3.00" Diameter (OD) |
| ATP-STL-036 |
|
(SS) Stainless Steel 90 Degree Elbow - 3.5" Diameter (OD) |
| ATP-STL-021 |
|
(SS) Stainless Steel 90 Degree Elbow - 4.00" Diameter (OD) |
| ATP-STL-009B |
|
(SS) Stainless Steel Straight Pipe - 3.5" - 2 foot section |
| ATP-STL-005 |
|
(SS) Steel Straight Pipe 2 feet length - 2.00" OD |
| ATP-STL-004 |
|
(SS) Steel Straight Pipe 2 feet length - 2.25" OD |
| ATP-STL-006 |
|
(SS) Steel Straight Pipe 2 feet length - 2.50" OD |
| ATP-STL-007 |
|
(SS) Steel Straight Pipe 2 feet length - 2.75" OD |
| ATP-STL-008 |
|
(SS) Steel Straight Pipe 2 feet length - 3.00" OD |
| ATP-STL-009 |
|
(SS) Steel Straight Pipe 2 feet length - 4.00" OD |
| ATP-FLS-151 |
|
*LOW PROFILE * - 44mm Wastegate Elbow 100% 304 Stainless |
| ATP-OIL-037 |
|
-03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends 24 INCHES long |
| ATP-OIL-021 |
|
-4 size Oil inlet fitting for GT28/30/35R with built-in restrictor |
| ATP-FTG-029 |
|
-4 size Oil inlet fitting for T25/T28 or unrestricted GT25R/GT28R/GT30R/GT35R |
| ATP-FTG-119 |
|
-8 AN Oil Drain Assembly for GT28/GT30/GT35 Series |
| ATP-HSG-009 |
|
.78 A/R Divided T3 Exhaust housing for GT Ball Bearing Series |
| ATP-HSG-040 |
|
.78 A/R Divided T3 Exhaust housing for StageIII (76 trim) turbine wheel |
| MMRAD-EVO-10X |
|
08+ Evolution X Line Performance Mishimoto Radiator |
| Samco TCS383 |
|
08+ Evolution X Samco Silicone Turbo Hose Kit |
| 08-09 STi AccessPORT |
|
08-09 STi Cobb AccessPORT |
| AccessPort EVO X |
|
08-10 Evolution X Cobb Tuning Accessport |
| ATP-MDP-013 |
|
1" Weld Nipple - 304 Stainless |
| ATP-FLS-120 |
|
1.25" Pipe 90 Degree Cast Elbow 304 Stainless |
| ATP-FLS-121 |
|
1.50" Pipe, 304 Stainless Schedule 10, 90 Degree Elbow 304 Stainless |
| ATP-STL-044 |
|
1.75" 180 Degree ( U-bend ) Mandrel Bent Elbow - Stainless |
| ATP-STL-045 |
|
1.75" Diameter(Stainless Steel) 12" STRAIGHT SECTION |
| SFX-FLX-009 |
|
1.75" Flex SS, 4" Long |
| ATP-OIL-028 |
|
1.8T Oil Feed adapter, Stock port to -4 Male AN) |
| ATP-SIL-126 |
|
1/4" (6.3mm) Extruded Silicone Vacuum Hose |
| MIA-VCM-002 |
|
1/4" Brass Tee |
| MIA-VCM-001 |
|
1/8" Brass Tee |
| ATP-SIL-125 |
|
1/8" ID - Extruded Silicone Vacuum Hose |
| AQP-FUL-031 |
|
1000cc Injector Set of 4, Low Impedence, EVO8/9 Fitment, RC Engineering |
| MIA-FST-033 |
|
10mm (1.5 pitch) Nut Locking Head |
| MIA-FST-032 |
|
10mm (1.5 pitch) Stud |
| ATP-MDP-012 |
|
12" Tall x 3.5" Thick, 2.5" Outlet Cast Aluminum End Tank |
| ATP-FUL-037 |
|
1200cc Injector set, 4 Cylinder, Low Impedance |
| ATP-SIL-270 |
|
135 Degree Turbo Silicone Elbow, 2" ID |
| ATP-SIL-269 |
|
135 Degree Turbo Silicone Elbow, 2.25" ID |
| ATP-SIL-271 |
|
135 Degree Turbo Silicone Elbow, 2.385" ID |
| ATP-SIL-272 |
|
135 Degree Turbo Silicone Elbow, 2.5" ID |
| ATP-SIL-273 |
|
135 Degree Turbo Silicone Elbow, 2.75" ID |
| ATP-SIL-274 |
|
135 Degree Turbo Silicone Elbow, 3" ID |
| ATP-SIL-275 |
|
135 Degree Turbo Silicone Elbow, 3.5" ID |
| ATP-SIL-276 |
|
135 Degree Turbo Silicone Elbow, 4" ID |
| ATP-FTG-090 |
|
14" Low profile -3 LINE Kit for GT25R through GT35R turbos |
| ATP-FTG-004 |
|
14mm Banjo Fitting Set for coolant lines - 3/8" Barb |
| ATP-VVW-116 |
|
1999-2002 MKIV vr6 Stage I |
| ATP-FLS-080 |
|
2 Bolt 4" Diameter Mild Steel Flange |
| ATP-FLA-012 |
|
2 bolt inlet adapter Flange GT25/28/28RS, alum |
| ATP-SIL-290 |
|
2" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-STL-034 |
|
2.00" 180 Degree ( U-bend ) Mandrel Bent Elbow - Stainless |
| SFX-FLX-001-B |
|
2.00" Flex SS, 4" Long |
| SFX-FLX-005 |
|
2.00" Flex SS, 6" Long |
| ATP-VVW-183 |
|
2.0T FSI Turbo Manifold - T25 flanged |
| ATP-VVW-182 |
|
2.0T FSI Turbo Manifold - T3 flanged |
| ATP-STL-033 |
|
2.25" 180 Degree ( U-bend ) Mandrel Bent Elbow - Stainless |
| SFX-FLX-006 |
|
2.25" Flex SS, 6" Long |
| ATP-SIL-291 |
|
2.25" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-STL-032 |
|
2.5" 180 Degree ( U-bend ) SS (Stainless Steel) Mandrel Bent Elbow |
| SFX-FLX-008 |
|
2.5" Flex SS, 8" Long |
| ATP-SIL-292 |
|
2.5" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| SFX-FLX-002 |
|
2.50" Flex SS, 6" Long |
| ATP-ACS-004 |
|
2.50" Hi-Flow Cone Air Filter |
| ATP-ALM-020 |
|
2.75" 90 Degree Extra Long 4" |
| ATP-SIL-293 |
|
2.75" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-VVW-227 |
|
2000 to 2003 Audi 2.7T Twin turbo Eliminator GT2560R (aka GT28R). 600HP |
| ATP-VVW-223 |
|
2000 To 2003 Audi 2.7T Twin Turbo Eliminator GT25R - 550HP |
| ATP-VVW-224 |
|
2000 To 2003 Audi 2.7T Twin Turbo Eliminator GT2871R - 800HP |
| ATP-VVW-222 |
|
2000 To 2003 Audi 2.7T Twin Turbo Eliminator GT28RS - 700HP |
| ATP-VVW-119 |
|
2000-2002 1.8T MKIV Stage IV |
| ATP-VVW-118 |
|
2000-2003 1.8T MKIV Stage III |
| ATP-VVW-123 |
|
2000-2005 1.8T GT28RS H/W Kit - Transverse |
| VH2778 |
|
2005-2009 Subaru Legacy GT 2.5L Turbo 5MT and 6MT (Spec. B) |
| ATP-FTG-091 |
|
22" Low profile -3 LINE Kit for GT25R through GT35R turbos |
| ATP-VVW-209 |
|
24V VR6 Turbo Kit |
| ATP-FLA-011 |
|
3 bolt outlet adapter - GT28R/GT25R/T25 Compressor, aluminum |
| ATP-MDP-008 |
|
3" Black 90 Degree Elbow w/1" Nipple for BOV/Diverter Valve |
| ATP-VEVO-030 |
|
3" Divorced Stainless Downpipe and Cat Delete Assembly for 2008+ EVO X |
| ATP-COB-003 |
|
3" Downpipe Flange Cobalt 2005+ |
| ATP-VVW-277 |
|
3" Downpipe Set for 2000-2002 B5 Audi S4 2.7T |
| ATP-HGC-017 |
|
3" High Flow Inlet Pipe Kit for Upgraded Turbos For Hyundai Genesis 2.0T |
| ATP-SIL-294 |
|
3" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-MS3-003 |
|
3" Inlet Pipe Kit for Mazdaspeed 3 |
| ATP-FLS-077 |
|
3" MAF Housing - Billet Aluminum-for DENSO Element |
| ATP-HGC-002 |
|
3" Racing Cat Delete Pipe, Hyundai Genesis Coupe 2.0T |
| ATP-FLS-060 |
|
3" Round to Oval Transition, stainless, GT28/GT30RWG flange |
| ATP-VVW-190 |
|
3" Stainless Cat Delete Upper Downpipe, Audi A4 B7 2.0T FSI |
| ATP-C30-001 |
|
3" Stainless Downpipe Assembly for Volvo C30 T5 |
| ATP-VSRT-010 |
|
3" Stainless O2 Housing/Turbo Discharge Module v.2.0 |
| ATP-VVW-177 |
|
3" Turbo V-band Downpipe Assembly for VR6 |
| ATP-MDP-010 |
|
3" V-Band Downpipe - Low Profile 90 Degree w/Flex |
| ATP-VVW-234 |
|
3" V-Band Downpipe For MKIV 3.2L VW R32 24V VR6 |
| ATP-VVW-229 |
|
3" V-BAND FLANGED Transition 60mm OD to 3" OD |
| ATP-FLS-083 |
|
3" Weld On T04 V-Band Flange |
| ATP-VVW-170 |
|
3.0" Downpipe Assembly for FWD 2.0T FSI Turbo |
| ATP-VVW-171 |
|
3.0" Modular Intake Kit VW Golf/Jetta/GTI/Audi A3 2.0TFSI Turbo |
| ATP-MDP-003 |
|
3.00" 90 V-Band Pipe - Long Leg |
| ATP-MDP-002 |
|
3.00" 90 V-Band Pipe - Short Leg |
| SFX-FLX-003 |
|
3.00" Flex SS, 6" Long |
| ATP-ACS-005 |
|
3.00" Hi-Flow Cone Air Filter - Big Base |
| ATP-ACS-006 |
|
3.00" Hi-Flow Cone Air Filter - Sm Base |
| ATP-MDP-004 |
|
3.00" V-Band Cat |
| ATP-MDP-001 |
|
3.00" V-Band Pipe - 45 Deg |
| ATP-MDP-005 |
|
3.00" V-Band Staight Pipe |
| ATP-SIL-295 |
|
3.5" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-FLS-055 |
|
3.5" V-Band Flange and Clamp Set - GT42, R/RS compressor Outlet |
| ATP-SIL-246 |
|
3/16" (4.7mm) ID Extruded Silicone Vacuum Hose |
| ATP-STL-046 |
|
304SS 1.5" Diameter(Stainless Steel) 12" STRAIGHT SECTION |
| ATP-STL-047 |
|
304SS 1.50" Diameter(Stainless Steel) 180 Degree ( U-bend ) with 5" legs |
| ATP-VVW-255 |
|
350HP - GT28RS Stock Location Turbo & Manifold for 2.0T FSI Models |
| MIA-GSK-012 |
|
4 Bolt Turbine Discharge Gasket 2.5" |
| ATP-SIL-296 |
|
4" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-MDP-011 |
|
4" Modular Downpipe with 3" V-Band |
| SFX-FLX-004 |
|
4.00" Flex SS, 8" Long |
| ATP-ACS-011 |
|
4.00" Hi-Flow Cone Air Filter - Sm Base |
| ATP-VVW-256 |
|
400HP - GT2871R Stock Location Turbo & Manifold for 2.0T FSI Models |
| ATP-HGC-008 |
|
400HP Garrett dual ball bearing GT2871R turbo, Genesis Coupe 2.0T |
| ATP-INT-001 |
|
400HP Garrett High Density Intercooler Core w/ATP Cast End Tanks |
| ATP-VVW-215 |
|
400HP Internally wastegated GT2871R Turbo kit for the B7 (2005.5 to 2008) Audi A4 2.0T |
| ATP-OIL-001 |
|
45 Deg 1/8" NPT to -3 AN |
| ATP-OIL-002 |
|
45 Deg 1/8" NPT to -4 AN |
| ATP-OIL-003 |
|
45 Degree 1/2" NPT to -10 AN |
| ATP-VVW-257 |
|
450HP - GT3071R-WG Stock Location Turbo & Manifold for 2.0T FSI Models |
| ATP-HGC-009 |
|
450HP Garrett dual ball bearing GT3071R turbo, Genesis Coupe 2.0T |
| ATP-VVW-213 |
|
450HP Turbo Kit for B7 Audi A4 2.0T FSI |
| ATP-FLS-075 |
|
5 bolt flange, for GT Internally Wastegated T3 exhaust housing |
| ATP-SIL-297 |
|
5" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-VVW-258 |
|
500HP - GT3076R-WG Stock Location Turbo & Manifold for 2.0T FSI Models |
| ATP-HGC-010 |
|
500HP Garrett dual ball bearing GT3076R turbo, Genesis Coupe 2.0T |
| ATP-SIL-298 |
|
6" ID Turbo Silicone Hose, 4-ply, 3-Foot Section |
| ATP-HGC-011 |
|
600HP Garrett dual ball bearing GT3582R turbo, Genesis Coupe 2.0T |
| ATP-INT-003 |
|
600HP Garrett High Density Intercooler Core w/ATP Cast End Tanks |
| AQP-FUL-032 |
|
750cc Injector Set of 4, Low Impedence, EVO8/9 Fitment, RC Engineering |
| MIA-FST-031 |
|
8mm (1.25pitch) Nut, Locking Head |
| MIA-FST-030 |
|
8mm (1.25pitch) Stud |
| ATP-OIL-005 |
|
90 Deg 1/8" NPT to -4 AN |
| ATP-SIL-264 |
|
90 Degree 1.00" ID High Temp Silicone Elbow |
| ATP-OIL-004 |
|
90 Degree 1/2" NPT to -10 AN |
| ATP-SIL-267 |
|
90 Degree 2" ID to 2.25" ID Transition Silicone Elbow |
| ATP-SIL-261 |
|
90 Degree 2" ID to 2.5" ID Transition Silicone Elbow |
| ATP-SIL-266 |
|
90 Degree 2" ID to 3" ID Transition Silicone Elbow |
| ATP-SIL-262 |
|
90 Degree 2.5" ID to 3" ID Transition Silicone Elbow |
| ATP-SIL-263 |
|
90 Degree 3/4" ID - High Temp Silicone Elbow |
| ATP-STL-038 |
|
90 Degree Elbow, 304 Stainless Steel 1" (OD) |
| ATP-SIL-278 |
|
90 Degree Transition Elbow 3" ID to 4" ID - Turbo Silicone |
| ATP-INT-008 |
|
900HP Garrett High Density Intercooler Core w/ATP Cast End Tanks |
| ATP-FUL-055 |
|
910CC Injector |
| ATP-VVW-233 |
|
97-04 Audi/Passat 1.8T GT2X Eliminator Hardware Kit REV2 |
| ATP-VVW-236 |
|
97-04 Audi/Passat 1.8T GT3071R-WG Eliminator Hardware Kit |
| ATP-VVW-151 |
|
97-04 Audi/Passat 1.8T GTRS Eliminator Hardware Kit |
| ATP-VVW-124 |
|
97-05 Audi/Passat 18T GT28RS H/W Kit |
| ATP-VVW-162 |
|
98-05 1.8T FWD Transverse GT2X Eliminator Hardware Kit |
| ATP-VVW-165 |
|
98-05 Quattro Audi S3/A3/VW TT 1.8T GT2871R Eliminator Hardware Kit for 225 HP model |
| ATP-VVW-164 |
|
98-05 Quattro Audi S3/A3/VW TT 1.8T GTRS for Eliminator Hardware Kit for 225HP model |
| SB4-HDG6 |
|
ACT Heavy Duty 6-Puck Disc Clutch Kit Subaru STI 2004-2011 |
| SB3-HDSS |
|
ACT Heavy Duty Performance Street Disc Clutch Kit Subaru Models (inc. 2002-2005 WRX) |
| SB5-HDSS |
|
ACT Heavy Duty Performance Street Disc Clutch Kit Subaru Models (inc. 2006-2011 WRX / 2005-2009 Legacy GT) |
| SB4-HDSS |
|
ACT Heavy Duty Performance Street Disc Clutch Kit Subaru STI 2004-2011 |
| ZM3-HDR4 |
|
ACT Mazda3 4 Pad Race Clutch Kit (Heavy Duty) 2004-2006 |
| ZM3-HDR6 |
|
ACT Mazda3 6 Pad Race Clutch Kit (Heavy Duty) 2004-2006 |
| ZM3-HDG6 |
|
ACT Mazda3 6 Pad Spring Race Clutch Kit (Heavy Duty) 2004-2006 |
| 600520 |
|
ACT Mazda3 Flywheel - ProLite :: 07-11 Mazdaspeed |
| 600640 |
|
ACT Mazda3 Flywheel - StreetLite :: 07-11 Mazdaspeed |
| ZM3-HDMM |
|
ACT Mazda3 Performance Clutch Kit (Heavy Duty) 2004-2006 |
| 600170 |
|
ACT ProLite Flywheel Subaru Models (inc. 2002-2005 WRX) |
| 600240 |
|
ACT ProLite Flywheel Subaru STI 2004-2011 |
| 600475 |
|
ACT ProLite Flywheel Subaru WRX 2006-2011 |
| 600175 |
|
ACT StreetLite Flywheel Subaru Models (inc. 2002-2005 WRX) |
| 600480 |
|
ACT StreetLite Flywheel Subaru WRX 2006-2011 |
| SB4-XTSS |
|
ACT Xtreme Duty Performance Street Disc Clutch Kit Subaru STI 2004-2011 |
| ATP-FTG-107 |
|
Adapter Fitting for Bottom of Bosch 044 Pump |
| ATP-FLS-039 |
|
Adapter, Tial 38mm to 44mm Wastegate, Billet Machined |
| ATP-FUL-013 |
|
Additional Injector Holder Kit |
| AEM 4 Channel Twin Fire Igniti |
|
AEM 4 Channel Twin Fire Ignition Module |
| AEM 8 Channel Twin Fire Igniti |
|
AEM 8 Channel Twin Fire Ignition Module |
| AEM 30-4406 |
|
AEM Boost Display Gauge |
| 21-687C |
|
AEM Cold Air Intake 2010+ Hyundai Genesis Coupe 2.0L Turbo |
| AEM 21-568C |
|
AEM Cold Air Intake Kit for the 04-05 Scion tC |
| AEM 21-680P |
|
AEM Cold Air Intake Kit for the 07-09 Scion tC |
| AEM 30-4401 |
|
AEM Fuel Pressure Display Gauge |
| AEM 30-3002 |
|
AEM Methanol Injection Kit |
| AEM 30-3000 |
|
AEM Methanol Injection Kit (With Tank) |
| 30-6310 |
|
AEM Series 2 Engine Management System for EVO 8 |
| 30-6320 |
|
AEM Series 2 Engine Management System for EVO 9 |
| AEM Uego Gauge |
|
AEM Single Channel UEGO Kit - AEM Wide Band |
| AEM Tru Boost |
|
AEM Tru Boost |
| 30-4350 |
|
AEM TRU BOOST Electronic Boost Controller |
| AEM 30-4402 |
|
AEM Water Temperature Display Gauge |
